Shelter logic canopy setup

 

With the nice weather here I love to spend time outside whenever I can. If I am not working, relaxing in a nice chair reading a book (or Kindle now) is great.

Living in New England the weather often changes daily, or hourly, and sudden storms can spring up. We also have mosquitoes like you would not believe! After hemming and hawing for a few years about building a deck and always changing my mind about the size, location and scope of it I decided that this year I would do something simple. Put up a screen room!

A few years ago my parents got a canopy and they have loved it. It keeps them dry when it rains and it also protects their older deck from the elements. The rage lately has been the 10 X 10 canopies that you buy at a big box store for under $100. I never liked these because they were too small for a get together and they are built to wear out after a few months of use.

I decided to go with the ShelterLogic 10 x 20-Feet Canopy 2- Inch 4-Rib Frame, White Cover as the canopy of choice. This was an upgrade from the 1in frame that was slightly cheaper. My thought was that if it was built bigger it would last longer. To keep the bugs at bay I also purchased the Screen Kit

I purchased them from Amazon (click through to help support the blog) and they were shipped directly from the factory. Within 5 days I had the canopy, screen kit and augers to hold them down.

Project Stats: Installing canopy and screen kit
Time: 2 hours
Cost: Medium
Difficulty: Easy
Value for cost: Medium
Tools Needed: Rubber Mallet, screwdriver

image

The box arrived, pretty beat up. Luckily no major parts were damaged or anything missing. One thing that was disappointing was the lack of instructions in everything I received. I contacted customer service and they sent me the wrong instructions (1in canopy instead of 2in)

image

A lot of the welds were also sloppy, and not complete. This seemed to me that they look to cut corners wherever possible to reduce cost and time. Luckily all of the parts are stamped with numbers on them to assist with layout and assembly.

image

First thing I did was take stock of all the parts to make sure they were there and laid them out where the canopy was to be assembled. If you noticed the lawnmower I did cut the grass very low so I could work and setup after.

image

The roof frame went up easily with just a few parts put together. I’m surprised that there were no bolts to hold it together, just friction at the connections hold it together. Overall it seems sturdy enough…

The next step was to put the legs on, this step is tricky to do alone, so I would suggest getting a helper for 5 minutes as you have to lift one side up then the other while attaching legs.

image

While I had Mrs. Geek help my with the legs I did tackle the cover myself. This got a little tricky, but not impossible. Patience was the best help with this. Moving slowly and not pulling too much. If I did it again I would put the cover on before the legs, but I wanted to follow the instructions to the letter.

image

The cover laid out next to the frame.

image

image

I started by feeding a little bit at a time until it would stay unassisted. Then I started to pull the cover a few feet towards the other side and move over a few feet. Before long I was on the other side and done!

image

 

 

 

image

The system to attach the cover to the frame is easy, just a few bungees that wrap around the frame. Go around and that is about it!

image

image

Simple simple

Putting the screen kit on was also very straight forward. This is simply deciding where you want the door and attaching 50 more bungees…

image

image

image

image

I was not very impressed with the screen kit. It came with a grommet not installed and a rip in the screen. We will see how good the customer service on this is…

image

Another factor is that due to the design there are quite a few areas where the screen sags and needs to be tightened daily.

image

Overall I love having a screened canopy in the back yard. It really adds the functions of a outdoor room without the permanence of building a screen room onto your house. With our situation, and a deck in the next few years, this was a great investment.  I have already run power and speakers out to the room. I actually just wrote this post in the room as well!

Score: 7 out of 10 I have some concerns about the construction quality and durability. If I had to do it again I would put up a canopy, but most likely get another brand.

 

 

Choosing a Vinyl Fence for your yard

As I have written about my yard and fences before: Removing an Old Fence The fence in my yard could use replacing. After a few years of pondering, saving and dragging my feet I decided that this was the year to replace our fence.

One section done while another is being put together.

I will start this post by saying that installing a fence properly is no small task. The fence I took down was put in with minimal effort. As I like to do things properly I did a lot of research into fencing and found that the best product overall for my situation was Vinyl Fencing. With no parts to rot, chip, stain it will last for years as long as I don’t run it over with my tractor.

What I found was there are a lot of fencing companies out there with big and small differences between them. Fencing found in big box stores are often made of lower quality materials and have some obvious traits.

Big Box Fencing Characteristics:

  • Weak walled boards and posts
  • Exposed brackets
  • Parts that will rust
  • Decorative Posts that cover wood
  • Rigid, Brittle plastics
  • Made in China
After checking out several fence contractors and examining products I decided to go with Active Yards. Their fencing had a build quality that I found to be impressive. Combined with an easy and effective design I was sold on their product. On top of that they are an American company that makes their product in this country! (I was not sponsored by Active Yards in any way)
High Quality Fencing Characteristics:
  • Solid construction
  • Invisible, routed brackets
  • No rusting parts
  • Solid Vinyl posts that will never rot
  • Easily assembled panels
  • Lifetime Warranty
  • American Made (there are some quality imported fences)
The Active Yards fencing had all of these characteristics, once I had the post holes dug the fence literally snapped into place.

 

The sections literally snap into place with the routed grooves!

If you are looking to install a fence make sure to go with a reputable fence company. After looking at about half a dozen companies I went with Active Yards, they had the best product at a great price point.

The next post will be on the install of a fence. This will include tips from the professionals and some great time saving techniques.

Removing an old fence, for a good cause

As I have mentioned before, I am about to install a new fence on my property. When we moved to our house we knew there were a lot of things that needed to be fixed, even though it was built in 2001. One of the biggest items was the fence.

My house looks great, but the fence does not.

The fence is in good shape, but not standing straight

As you can see this fence has had better days. First of all it was not installed properly that could not hold up to the brutal New England seasons we have. We live in a high elevation zone where there is constant wind, massive snow storms and lots of rain throughout the year. After 10 years of abuse and theformative years with no proper maintenance it started to show its age.

It might have been upright once, but not anymore.

That is NOT level!

The fence itself is not in horrible shape. Sure there are a few sections that have some rot and broken pieces. There is also the color, an awful brown color that did not go with our white siding one bit… That is why I decided to donate this fencing to Habitat for Humanity Restore Outlets They take materials like this and make them available to people who need them. Now instead of throwing this away, or burning it I know it will go and provide years of help to another family that needs a fence.

They even came by to pick up the fence!

Taking this fence down was pretty easy. I did half of it by myself in a few hours and the rest down in two hours with a friend.

This 4ft picket was easy to take down solo

In case you were wondering, that is not how my property line goes. It is a straight line, not a curve. To take this fence down was really simple, as most of the posts were either resting on the ground, or only a few inches down.

This is how far a post was in for a 6ft section.. YIKES!!!

The picket fence came down with ease and stacking it was simple. The other side of the house however was a different story. It consisted of about 12 sections of 6ftX8ft fencing and it was bulky to move! Luckily I had my friend Gene help me out.

Lots of fencing, I told Gene if he helped I would make him an internet star!

Working together we came up with a nice system to remove the sections and then take out the posts.

Take out a few sections and then remove the posts.

This moved extremely quickly until we were had them all down.

All down! Now we are done right?

With help, and poor construction methods this fence came down easily. Most of the posts were only a few inches in. and a total of 3 had concrete (minimal).

Hammer height is for outlets, not fence posts!

 

Looked like it was secure, but it was not!

Since these are going to Habitat and I wanted to make sure they stayed safe until they were picked up I stacked them in my driveway. Instead of carrying them I used my John Deere and cart to carry them.

Oh the things you can do with a tractor and a cart!

This allowed us to move them quickly around the yard. Yes, Gene did get to ride in the trailer :)

Overall the project was quick and easy to take down. Habitat came today, but they could only take a few sections as they did not realize how much fencing I was donating, so they will be back next week to pick up the rest.

Remember if you have something that you are going to be replacing or getting rid of, see if someone else could use it before you throw it away!

 

Fixing up the odd space between the planting beds and walkway.

One thing that I have always been a slacker on is my front yard. When I purchased my house the previous owner mentioned to me that he wanted the least amount of work to do in the yard. This resulted in him using unreasonable amounts of gravel anywhere he could. Over three years later and I am still picking up gravel in places you would never imagine.

Although the front yard is one of my lower priorities, I have been working hard to add the “Curb Appeal” one step at a time.  For my birthday this year my wife and mom replanted some front planting beds I had made a few years ago.  They added weed-block, flowers, pruned the existing foliage and redid the mulch. This was a great present as I did not have to do it!

There was a nice looking planting bed and walkway, but in between was over run with weeds!

As you can see the planting beds looked great, however the rest looked hideous. Last year I removed a brick walkway that was overrun with weeds and make a nice concrete walkway.  Before the weeds blended in and were not as noticeable, however with the new walkway this area stuck out like a sore thumb.

Getting Started

As you can see the soil is poor and nothing good wants to grow there.

The existing plant matter had to be completely removed so I would not just have more weeds popping up in a few days. I used my handy small spade shovel, a 3-tong rake, and a hoe to remove all of this vegetation.

Another angle of the project

While I was digging all of this up, I was reminded of past plantings in this area. Below is the remains of some Irish Moss that I had planted here two years ago with the hopes that it would spread and grow. It did not.

Rest in the compost pile little guy…

Past plantings had proved to be unsuccessful in this location.

With nearly everything removed with hand tools I went in to detail mode, pulling everything I could from this area. It is amazing how grass grows where you do not want it to, but try and plant it and it never takes!

I started by removing all of the weeds and other plants growing to start with a clean slate.

After that the soil was ready to be amended.

Now that the soil was clear I could start with the fun part!

I collected all of the plant matter and put it in a compost pile.

All of the plant matter, soil and twigs I put in a compost pile in my back yard. I have one for sorted items (food scraps, garden plants, etc…) I also have one for projects like this, grass clippings (when I don’t mulch) and weedy material. Compost is easy to make and can be used everywhere.

The soil looks great here!

Although the soil looks great in the above photo, below the surface is a different story. As you can see below, once I dug down I discovered that there was a tightly packed clay soil. This is not conducive to grow anything but weeds.

In order to promote root growth I dug down about a foot to loosen the soil.

To help make this soil better, I dug down to make sure the soil was loose to promote root growth. This would also allow me to mix better soil into the area.

Below the surface there was a lot of clay soil, not the best for plants.

I did find a few friends like this one while i was digging. Worms are awesome in the gardening area. Keep them around by using organic gardening methods!

Worms are awesome!

After digging the entire area up, I was ready to start adding some soil.  Luckily the soil was below grade so I did not have to remove much existing soil.

It does not seem like much, but digging this out took a bit of work in the hot sun.

 

Now the soil is dug up, but it still needs some help.

 

The soil here was clumpy and full of clay...I need to fix this.

 

I made sure to pull all rocks out of the area. I have a rock box for other projects.

To amend the soil I used a ratio of 2 bags of Top Soil to 1 bag of mushroom compost. I have found that Agway soil is actually really good and not full of junk like a lot of other big box top soils. I also mixed in a little bit of organic garden fertilizer to promote root growth.

I used a mixture of 2 to 1 Top Soil to Compost

I mixed all of this up in my tractor dump cart. I got a John Deere X300 last year, and I love it!

I love my tractor cart, I mixed the soil quickly and easily in it.

The pictures before show that the soil used to look like it was full of nutrients, but once I add the composted soil you can see how different it looks! The new soil is almost black it is so rich.

Look at how rich this mixture looks!

After filling it in, I mixed the soil in with the existing area. This helped the soil below gain those needed nutrients so everything will grow.

The soil looks nice, but I had a little too much (for this projects anyway)

To help speed up the planting process I placed all of the plants above where I wanted them to go. Spacing them evenly all the way down. This allowed me to go down the line without stopping to measure or eyeball where I wanted them.

I placed all of the plantings above where they were going so I could work straight through.

 

Make sure to read the tags for proper spacing and planting information.

Before planting, I took a bunch of newspaper and soaked it in water. I’ll go into newspaper in a little bit.

What am I doing with newspaper? Continue to read to find out!

A typical problem of store bought plants is they become root bound. I made sure to cut and spread the roots so they would start looking around.

The Plants from Agway were a little root bound.

 

All the plants are in and they look great!

After the plants are in I laid down a thick layer of newspaper. I cannot say enough about how great newspaper is in the garden landscape. Not only does it block weeds, it helps keep the ground moist. Promotes worms (this is a good thing) and brings them to the surface.

Please note that you should not use the glossy ads, but rather the regular paper. This breaks down after around a year, so it does need to be replanted. Most newspapers give away old print for free, so you can have a great resource for no cost!

Newspaper, a great free weedblock.

Finally, I put the mulch down. I always go with hemlock mulch as it is natural, lasts a long time and is not dyed. A lot of my gardening friends always go with this for these very same reasons.

Cover it all with some nice hemlock mulch.

I wonder who the shadow belongs to?

Now everything matches and looks great! Now when I have people walk up to the house, I do not feel embarrassed. This will last a few seasons with no problems. When I do have to refresh it I just need to remove the mulch and lay down new newspaper.

All finished! And it looks awesome!

Project Stats:

Time: 3 hours
Cost: $45 for plants, mulch and soil
Difficulty: Easy
Value for cost: High